Monster Cable POWERMOUNT 350S - Manual (Page 21)

15
Attach the mounting plate and power unit to the wall
with the supplied lag bolts and round washers,
as shown. Tighten each bolt with your electric drill
or socket wrench.
DO NOT over tighten bolts. This can damage
the wall plate or your wall surface.
8)
�����
�����
Masonry
Wall
Concrete
Anchors
Lag Bolts and Washers
3/16 in/5 mm
Hole
3 in/76.2 mm
Deep
Wall
Mounting
Plate
PowerMount
Wall Unit
3/16 in/5 mm Hole
3 in/76.2 mm Deep
PowerMount
Wall Unit