Marantz IS301 - Manual (Page 17)

11
NAMES AND FUNCTIONS
ENGLISH
BASIC
OPERA
TIONS
ADV
ANCED
OPERA
TIONS
TROUBLESHOOTING
OTHERS
BASIC
OPERA
TIONS
q CONNECTING THE EXTENDER AND AN AMPLIFIER
1. Connect the AUDIO OUT terminals of the extender with the line input terminals of an amplifi er/
receiver, via the supplied AV cable.
2. Connect the video input terminal of an amplifi er/receiver/TV to one of the VIDEO OUT terminals
(VIDEO/S-VIDEO/COMPONENT) of the extender, using an appropriate video cable.
The S-VIDEO and component video cables are not supplied with this unit. Use a commercially
available video cable.
Note
NEVER connect different video cables simultaneously, as this may result in disturbed video signals or a failure.
3. If you wish to remotely control the connected equipment using the Marantz REMOTE CONTROL
terminals, connect the REMOTE CONTROL terminals of the connected equipment and the
extender with the supplied remote cable.
BASIC OPERATIONS
w CONNECTING THE BASE UNIT AND EXTENDER WITH IS-LINK
1. Connect the base unit and extender with two supplied IS-LINK cables.
COMPONENT
S-VIDEO
VID EO
Extender
Base unit
IS-LINK cables
2. Connect the supplied AC adaptor to the AC adaptor terminal of the extender.
(For details on preparation of the AC adaptor, see page 6.)
e CONNECTING THE HANDSET TO THE BASE UNIT
For details on connection, see page 8.
• During IS-LINK connection, power is supplied to the base unit from the extender. Therefore, it is not
necessary to connect the AC adaptor to the base unit.
r CONNECTING AN iPod TO THE HANDSET
For details on connection, see page 8.