Morphy Richards 40684 - Manual (Page 7)

77
To clean a stainless
steel soleplate
(certain models only)
To keep the soleplate of your
iron clean and free of limescale,
we recommend that you use one
of the gentle chrome, silver or
stainless steel cleaners that are
generally available. Always follow
the manufacturer’s instructions.
To clean off melted man-made
fibres, set the iron at the 3 dot
position and pass it over a clean
piece of cotton which will draw
the deposit off the surface.
To clean a coated
soleplate
(certain models only)
In the unlikely event of any
man-made fibre fusing to the
soleplate, set the iron at the
3 dot position and pass it over a
clean piece of cotton which will
draw the deposit off the surface.
Do not use scouring powder or
solution as this could cause
damage to the coating.
To clean an
aluminium soleplate
(certain models only)
To keep the soleplate clean and
free of limescale, make a paste
of mild scouring powder and a
little water. Apply a small amount
to the soleplate, rub and then
remove with a damp cloth. Wipe
thoroughly with a clean cloth.
To clean the exterior
Allow the iron to cool and wipe
over with a damp cloth and mild
detergent, then wipe with a dry
cloth.
Helpline
If you have any difficulty with
your appliance, do not hesitate
to call us.
We are more likely to be able to
help than the store from where
you bought it.
Please have the following
information ready to enable our
staff to deal with your query
quickly:
• Name of the product.
• Model number as shown on the
underside of the appliance.
• Serial number as shown on
underside of the appliance.
UK Helpline 0844 871 0953
Replacement Parts 0844 873 0719
Ireland Helpline 1800 409 119
G G
H H
40684 rev3 17/6/08 17:03 Page 7