Installation 7, Setting the cooktop into place 7, Securing the cooktop 7 – Miele KM 360 User Manual

Page 7: Installation, Setting the cooktop into place, Securing the cooktop

Advertising
background image

Setting the cooktop into place

^ Screw the gas regulator onto the

nipple underneath the cooktop. For
convenience, an AGA or CGA
approved flexible stainless steel gas
hose (accordion type) may be used
between the gas connection and the
regulator. For more information see
"Gas connection - Gas pressure
regulator".

The included gas regulator

must

be

installed between the cooktop and
the gas shut off valve. If clearance
for the regulator does not exist
directly under the cooktop, it may be
moved closer to the shut off valve.

^ Guide the power cord through the

cut-out.

^ Set the cooktop in the cut-out and

center it.

Securing the cooktop

^ Secure the cooktop in position with

the supplied fixing brackets, a.

The cooktop must not be
permanently sealed into the
countertop when installed.
The sealing strip under the edge of
the cooktop provides a sufficient
seal for the countertop.

If the cooktop is sealed into position,
the countertop or appliance may be
damaged if the cooktop needs to be
removed for maintenance or service.

Installation

7

Advertising