Magellan eXplorist XL - Manual (Page 40)

32
Accessing the Route Menu
The Route Menu is used to create and view up to five single or multi-
leg routes. A pop-up menu allows you to activate, deactivate, or reverse
a selected route, edit or view the legs of the route, or clear the route.
The ROUTE MENU can be accessed in three ways:
Ẅ Press MENU, use the UP/DOWN
ARROWs to select ROUTE MENU in the
FUNCTION MENU, and press ENTER.
FUNCTION MENU
SAT STATUS
ROUTE MENU
WAYPOINTS
SETUP
SIMULATOR
ẅ From any NAV or PLOT screen,
press ENTER to access the pop-up
menu, select ROUTE MENU and press
ENTER.
Ẇ Press GOTO and highlight ROUTE
and press ENTER.
Creating a Multileg Route
This creates a route of 1 to 15 legs. Each leg has a start and end
waypoint. Each end waypoint is the start waypoint for the following
leg.
Access the
ROUTE
MENU
Use ARROW KEYS
to highlight an empty
route
ENTER
Use ARROW KEYS
select start of route
waypoint
ENTER
Use ARROW KEYS
select end of leg
waypoint
ENTER
To finish creating a multileg route, press ENTER without selecting
a "TO" waypoint.
SAVE POS
CREATE WPT
ROUTE MENU
CONTRAST
ESCAPE
GOTO
MOB
BCKTRK
ROUTE
COORD
JETTY
DOCK
WP001
WP002
BUOY