Marantz TT-15S1 - Manual (Page 9)

5
ASSEMBLING AND ADJUSTING
1. Installing the ground wire
Connect the ground wire to the turntable shaft base.
2. Inserting the center shaft
Insert the center shaft into the turntable chassis.
3. Installing the turntable
Place the turntable onto the center shaft.
4. Attaching the tone arm
a) Pass the Phono cable that is connected to the tone arm
through the tone arm attachment hole.
b) Determine the height and direction of the tone arm
attachment position.
b-1) Height
Bear in mind that the height position of the tone arm is
different depending on whether or not the turntable
sheet is used.
• When using the turntable sheet
The correct height position is achieved when the
counter weight and tone arm height adjustment sheet
are placed beneath the arm lifter.
• When not using the turntable sheet
The correct height position is achieved when just the
counter weight is placed beneath the arm lifter.
(Tone arm height adjustment sheet is not used.)
No turntable sheet
Arm lifter
Counter weight
With turntable sheet
Arm lifter
Counter weight
Tone arm height
adjustment sheet
Tone arm
phono cable
Turntable chassis
Turntable
Center shaft
Center shaft
Turntable chassis
Turntable shaft base
Ground wire