Moxa Technologies CP-118EL - Manual (Page 8)

PCI Express Board User’s Manual Introduction
1-4
Installation Flowchart
The following flowchart provides a brief summary of the procedure you should follow to install
the PCI Express boards and also provides references to chapters with more detailed information:
Use the onboard DIP Switches to select the
data transmission mode for each port.
(CP-118EL only)
Chapter 2, “Hardware Installation”
Install the boards in PCI Express expansion
slots.
Chapter 2, “Hardware Installation”
Install the drivers and configure the boards
and ports.
Chapter 3, “Software Installation”
Connect the serial devices to the PCI
Express board’s serial ports.
Chapter 5, “Pin Assignments”
Restart the system, and check the driver
initialization status.
Chapter 3, “Software Installation”
Develop and run your serial
communication applications
Chapter 4, “Serial Programming Tools”