Tion, Before operation -16, Paper sheet set – MITSUBISHI ELECTRIC CP3020DAE User Manual
Page 12: Removing the shipping inserts, Before operation
10
CONNECTIONS
PRECAUTIONS
PREP
BEFORE OPERATION
Before printing,
1. Remove the shipping inserts on both sides of the paper tray inserting slot and the spacer inside
the paper tray. (See below)
2.
Install the ink cassette with an ink sheet loaded correctly. (see page 11)
3.
Install the paper tray with the print paper loaded correctly. (see pages 12-13)
4.
Install printer driver. (Page15)
PAPER SHEET SET
Make sure to use the following types of paper sheet and ink sheet set.
2
2
2
2
2
PAPER SHEET SET (Print paper and ink sheet)
Product name
Ink sheet size
No. of prints
Usage
CK3020L4P
A4 size
50 (50 sheets x 1 pack)
Surface-laminated colour print (glossy)
CK3020LL4P
Letter long size
50 (50 sheets x 1 pack)
Surface-laminated colour print (glossy)
CK3020L4PM
A4 size
50 (50 sheets x 1 pack)
Surface-laminated colour print (matte)
CK3020LL4PM
Letter long size
50 (50 sheets x 1 pack)
Surface-laminated colour print (matte)
REMOVING THE SHIPPING INSERTS
2
2
2
2
2
REMOVING THE SHIPPING INSERTS ON THE PAPER TRAY SLOT
1
1
1
1
1
Hold the tab on the shipping inserts and pull to the center.
2
2
2
2
2
Remove the other side of shipping inserts in the same way.
NOTE
Do not discard the shipping inserts. When you do not use the printer for a long period or
transport this printer, make sure to attach the shipping inserts on the slot or the rollers may be
deformed.
2
2
2
2
2
REMOVING THE SPACER FROM THE PAPER TRAY
1
1
1
1
1
Remove the cover on the paper tray.
2
2
2
2
2
Remove the spacer.
POWER
POWER
shipping insert