Pro gram chart 56, Program chart, Program chart program when to use detergent – Miele G848 User Manual
Page 56
Program chart
Program
When to use
Detergent
chlorine
free
1)
containing
chlorine
2)
Compart-
ment
II
(Wash
cycle)
Compart-
ment
I
(Pre-
wash)
Compart-
ment
II
(Wash
cycle)
Normal
3)
55 °C/130 °F
for
normal
everyday loads
100 %
20 %
80 %
Sani Wash
as Normal 55 °C/130 °F,
but with longer wash time for
heavily soiled
loads, also suitable for chlorine free deter-
gents
100 %
20 %
80 %
Normal
65 °C/150 °F
as Normal 55 °C/130 °F,
but at a higher temperature for
stubborn
dried on food
100%
20 %
80 %
Light Wash
55 °C/130 °F
for
normal
everyday loads, particularly suit-
able for chlorine free detergents
100 %
100 %
Economy
55 °C/130 °F
for normal everyday loads,
particularly energy saving program
100 %
100 %
Rinse & Hold
For rinsing dishes when a complete cycle is
not needed.
The dispensing method will depend on the type of detergent being used.
1) Use this ratio for:
–
detergent which is chlorine and phosphate free
–
detergent which is chlorine free but contains phosphates
In this instance the whole amount is placed in compartment II.
2) Use this ratio for:
–
powder detergent which contains chlorine and phosphates
Divide the total amount, as shown, between compartment I and compartment II.
When washing a full load in the Normal program, the Sani Wash program, the Light Wash program or
the Economy program at least 1 ½ tablespoons (25 ml) of detergent are needed.
Program chart
56