Multi-Tech Systems MT5634ZPX User Manual
Page 39
MT5634ZPX
39
3 AT Commands, Result Codes and S-Registers
X3
Extended result codes with
BUSY; does not look for
dial tone.
X4
Extended result codes with
NO DIALTONE and
BUSY.
X5
Extended result codes with
NO DIALTONE and
BUSY.
X6
Extended result codes with
NO DIALTONE and
BUSY.
X7
Basic result codes with
NO DIALTONE and BUSY.
Command:
Y
n
Long Space Disconnect
Values:
n = 0
Default:
0
Description:
Y0
Disable sending or responding to long space break
signal on disconnect.
Y1
Enable sending or responding to long space break
signal on disconnect. (Not supported.)
Command:
Z
n
Modem Reset
Values:
n = 0 or 1
Default:
None
Description:
Z0
Reset modem to profile saved by the last
&W
command.
Z1
Same as Z0.
Command:
&B
n
V.32 Auto Retrain
Values:
n = 1
Default:
1
Description:
&B0
Disable V.32 auto retrain. (Not supported.)
&B1
Enable V.32 auto retrain.
Command:
&C
n
Data Carrier Detect (DCD) Control
Values:
n = 0 or 1
Default:
1
Description:
&C0
Force Data Carrier Detect signal high.
&C1
Let Data Carrier Detect follow carrier signal.