Mellerware PALERMO 29002 - Manual (Page 10)

TROUBLE SHOOTING
Symptom
Water leaking out of the
Glass Jug
Espresso coffee drops out
too slowly (Not only for the
coffee maker with pump)
The metal parts in the tank
have rust.
Water leaks from the bottom
of coffee maker.
The coffee maker does not
work any more.
The steam cannot froth.
Acid (vinegar) taste exists in
Espresso coffee.
The glass jug is not situated
properly The glass jug is not situated
properly
The level of water in the tank
exceeds the MAX indicator.
Ground coffee too fi ne
The descaler is not of the
recommended type. It may
corrode the metal parts in
the tank.
There is too much water in
the drip tray.
The wall socket is not oper-
ating well, or the plug is not
plugged in properly.
The steam pipe may be
blocked
The coffee maker was not
rinsed correctly after clean-
ing mineral deposits.
The coffee maker was not
rinsed correctly after clean-
ing mineral deposits.
The level of water in the tank
exceeds the MAX indicator.
Use 1# coffee powder.
Use the descaler recom-
mended by Creative House-
wares (PTY) LTD
Clean the edge of the fi lter
Plug the power cord into an-
other wall socket correctly, if
the appliance still does not
work, please contact with
the authorized service facil-
ity or Creative Housewares
for repairing.
Use a pin to clear any resi-
due from the pipe. Follow
steps 5-6 under HOW TO
DESCALE MY COFFEE
MAKER (For the section of
making espresso coffee). If
the problem persists, please
contact us.
Clean coffee maker per the
content in the section “be-
fore the fi rst use” for several
times.
Please use fresh coffee
powder, or store unused
coffee powder in a cool,
dry place. After opening a
package of coffee powder,
reseal it tightly and store it in
a refrigerator to maintain its
freshness.
Cause Corrections
MW_EX29002_Palermo_IM.indd 10 MW_EX29002_Palermo_IM.indd 10 10/29/2008 12:05:32 PM 10/29/2008 12:05:32 PM