Makita 6951 - Manual (Page 5)

5
SPECIFIC SAFETY RULES
USB057-2
DO NOT let comfort or familiarity with product (gained from
repeated use) replace strict adherence to impact driver safety
rules. If you use this tool unsafely or incorrectly, you can suffer
serious personal injury.
1. Hold tool by insulated gripping surfaces
when performing an operation where the
cutting tool may contact hidden wiring or
its own cord. Contact with a “ive” wire will
make exposed metal parts of tool “live” and
shock the operator.
2. Hearing protection should be worn when
operating in impact conditions.
3. Hold the tool firmly.
4. Always be sure you have a firm footing.
Be sure no one is below when using the
tool in high locations.
SAVE THESE INSTRUCTIONS
WARNING:
MISUSE or failure to follow the safety rules stated in this
instruction manual may cause serious personal injury.
SYMBOLS
USD202-2
The followings show the symbols used for tool.
V ....................... volts
A ....................... amperes
Hz ..................... hertz
................ alternating current
.................... no load speed
.................... Class II Construction
.../min................ revolutions or reciprocation per
minute
................ number of blow
n
˚