McCulloch ElectraMac 95390047900 - Manual (Page 12)

Motor does Motor turns Chainsaw Motor turns
not start with difficulty starts but does improperly and/or
or loses power not cut properly at reduced speed
Make sure the mains are powered
·
Make sure the machine is
properly plugged into the wall socket
·
Make sure neither the power cable
nor the extension are damaged
(see chapter on electric parts )
·
Make sure the safety chain
brake is not engaged
(see chapter on safety chain brake)
·
Carry out the procedures for
correct installation of the chain
·
Make sure the chain is sharpened,
if not, contact your dealer
·
Contact an authorized
service center
· ·
ENGLISH - 5
Troubleshooting table
If the chainsaw continues to malfunction, contact your dealer
FOR TECHNICAL INFORMATION PHONE THE TOLL-FREE NUMBER 800-017829