Installing the battery – Motorola C300 User Manual
Page 14
Advertising

14
Getting S
tarted
Installing the Battery
Before you can use your phone, you need to install and
charge your battery.
Caution: Do not remove the battery when your phone
is on—you may lose all your personal settings stored
either in your SIM card or phone memory.
1 If the battery door is already
in place, push down the
battery door release latch,
then slide the door slightly
downward.
2 Pull the cover up and off the
phone.
3 Place the battery onto the back of the handset, with the
battery’s contacts facing down in alignment with the
contacts on the battery compartment.
4 Push the battery forward into
the compartment.
5 Press the battery down until it
clicks into the compartment.
C300.book Page 14 Thursday, November 7, 2002 4:06 PM
Advertising