Programming, English, Programmed play – Marantz DR6000 User Manual
Page 17
15
ENGLISH
Clearing a program
1
1
1
1
1
Press
9
9
9
9
9
STOP
(17, 68) if necessary to stop programmed
play.
2
2
2
2
2
Press
9
9
9
9
9
STOP
(17, 68) again to clear the program.
➔
PROGRAM disappears from the display.
•
The program is also cleared if you open the disc tray.
Erasing a track from a program
1
1
1
1
1
In Stop mode press
PROG
(72) on the remote control to
enter Program mode.
2
2
2
2
2
Use
Q
Q
Q
Q
Q
(19, 62) or
R
R
R
R
R
(18, 67) to select the track from
which to delete.
➔
The track number and program step will be shown on
the display.
3
3
3
3
3
Press
CANCEL/DELETE
(10, 66) to erase the track from
the program.
➔
The remaining program steps and the remaining playing
time of the program will be displayed.
PROGRAMMING
The numbers between parentheses refer to the fold-out.
Programmed play
•
You can program up to 99 tracks to play in any desired se-
quence.
•
Tracks can be programmed more than once, but each time
counts as a track. (step)
Programming for playback
1
1
1
1
1
Press
PROG
(72) on the remote control to enter Pro-
gram mode.
➔
PROGRAM flashes and
appears on the display.
2
2
2
2
2
Select the required track numbers by turning the
EASY
JOG
(12) key left or right and store by pressing
PUSH EN-
TER
(12, 65).
or:
Key in a track number with the
NUMBER
(57). For 2-digit
numbers, press the keys in rapid succession.
➔
The track will be stored in the program.
➔
The track number, total program time and the number of
programmed tracks (steps) are displayed.
3
3
3
3
3
Repeat step
2
2
2
2
2
for all tracks to be programmed.
4
4
4
4
4
Press
STOP
(17, 68) or
PROG
(72) on the remote control
to end programming.
➔
PROGRAM lights continuously.
5
5
5
5
5
Press
2
2
2
2
2
/
;
;
;
;
;
PLAY/PAUSE
(16, 60) to start programmed
play.
DR6000(U)_Eng_P11-21.p65
8/7/00, 1:37 PM
15