Miele G 7827 - Manual (Page 8)

The mobile units and special
inserts should only be used for
their specific application.
Empty any containers or utensils
before arranging them in the
machine.
Do not allow any remains of acids,
solvents or corroding ferrous
material, and in particular hydrochloric
acid or chloride solutions to get into the
wash cabinet. Similarly avoid any
materials with a corrosive effect. The
presence in compounds of any solvents
should be minimal, (especially those in
hazard class A1).
To avoid any corrosion damage
ensure that solutions or steam
containing hydrochloric acid do not
come in contact with the stainless steel
casing of the machine.
Please follow the installation advice
in these instructions and the
separate Installation Instructions.
Using accessories
Only specific additional equipment
made by Miele should be
connected to this machine. Consult a
Miele Application Specialist on the type
and application of such equipment.
Only Miele mobile units, modules
and inserts should be used. If
equipment from another manufacturer
is used, Miele cannot ensure the
cleaning and disinfection results.
Damage or injury caused by this are
excluded from the warranty.
Disposal of an old appliance
When discarding a lab washer,
disconnect it from the power
supply and cut off the power cord.
The old appliance may be
contaminated by blood or other body
fluids and must be disinfected before
disposal.
For environmental and safety reasons
ensure the machine is completely
drained of any residual water and
cleaning agent. (Observe safety
regulations and wear safety goggles
and gloves). Make the door lock
inoperative or remove the door
completely, so that children cannot
accidentally shut themselves in. Make
appropriate arrangements for the safe
disposal of the machine.
Machines with a tank system: remove
the water from the tank before
disposing the machine.
SAVE THESE
INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
8