Cleaning the spray arms 34, Maintenance, Cleaning the spray arms – Miele G 7827 User Manual
Page 34
Advertising
Cleaning the spray arms
The spray arm jets can get clogged.
Check daily and clean if necessary.
^ Use a sharp pointed object to push
particles into the spray arm jets and
rinse thoroughly under running water.
^ Remove the mobile unit.
Labwasher spray arms
^ Loosen the nut with a 60 mm wrench
and pull the spray arm upwards or
downwards respectively.
Mobile unit / insert spray arms
^ Turn the nut with the spray arm
counterclockwise and pull the spray
arm downwards.
^ Refit the spray arms after cleaning in
the reverse order.
After replacing the spray arms
check that they rotate freely.
Maintenance
34
Advertising
This manual is related to the following products: