Mitel 5606 - Manual (Page 30)

5606 Wireless Handset User Guide
24
5. Highlight the new value(s) and then press the Select soft key. The handset automatically
returns to the modes list with this setting highlighted.
Set the Mode to Absent On/Off
1. With the Modes tab selected, press the Down navigation key to enter the Modes menu.
2. Use the Down navigation keys to highlight Absent and then press the Change soft key.
The Absent checkbox is selected/cleared.
Choose the Modes Answering Method
1. With the Modes tab selected, press the Down navigation key to enter the Modes menu.
2. Use the Down navigation keys to highlight Answer and then press the Right navigation key.
3. Use the Down navigation key to select the answering method you want. You can choose
from the following four options:
• Ordinary: When using this method, calls are connected in the normal manner when
you press the ON button.
• Auto: When using this method, calls are automatically connected.
• Loud: When using this method, the call is connected with loudspeaking function turned
on when you can press the ON button.
• Auto loud: When using this method, calls are automatically connected with loudspeak-
ing function turned on.
4. When you have highlighted the appropriate method, press the Select soft key. The name
of the selected method is displayed. The handset automatically returns to the list and the
new answering method is highlighted.
Use the Modes Menu to Switch the Handset Off
1. With the Modes tab selected, press the Down navigation key to enter the Modes menu.
2. Use the Down navigation keys to highlight Switch Off and then press the Select soft key.
3. Select Yes and then press the OK soft key. The handset switches off.
Change Mode Remotely
Depending on parameters, it is possible to set the mode of a handset remotely by sending a
new message to the handset.
When the mode is changed the following happens to a handset:
• The pre-alarm warning signal is stopped
• The Automatic Location Signal (ALS) continues even after mode change
• Ring signal volume may change
Note: You can also switch off the handset by pressing and holding the OFF button or by
programming a hot key to perform the switch off function.