Problem solving guide 33, Fault messages in the display 33, Problem solving guide – Miele T 4839 Ci User Manual

Page 33: Fault messages in the display

Advertising
background image

With the help of the following notes, minor faults in the performance of the
machine, some of which may result from incorrect operation, can be put right
without contacting the Service Department.

,

Repair work to electrical appliances should only be carried out by a

suitably qualified person in strict accordance with current local and national
safety regulations. Repairs and other work by unqualified persons could be
dangerous. The manufacturer cannot be held liable for unauthorised work.

Fault messages in the display

Problem

Possible cause

Remedy

l

Adjust the load

+ the programme is
cancelled, the buzzer
sounds

This is not a fault.

The electronic unit has
recognised that there is
no laundry in the drum
and cancelled the
programme.

Drying individual
garments or items which
are already dry can also
cause the programme to
be cancelled.

Use the Warm air
programme (timed
drying) to dry individual
items.

To delete the fault
message:
– Open the door.

q

Please empty
the container

+ the cooling down
phase starts, the buzzer
sounds

The condensed water
container is full or the
drain hose has a kink in it
or is blocked.

– Empty out the

condensed water
container or check the
drain hose.

To delete the fault
message:
– Switch the dryer off

and then back on
again.

Problem solving guide

33

Advertising