Inserting a spare battery pack into the charger, Inserting a spare battery pack, Into the charger – Motorola 9601 User Manual
Page 20
Advertising
General Care
2-6
Issue 3 October 1997
Inserting a Spare Battery Pack into the Charger
1. The message LOW BATT appears on the phone display window when it is
time to insert a charged spare battery.
2. Remove the battery pack from the pocket phone by moving the latch on top
of the phone forward until it releases the battery pack. Slide the battery
pack off the pocket phone.
3. Place the spare charged battery pack into the Battery Compartment of the
pocket phone.
NOTE:
When the Battery indicator changes from yellow to steady green, the
spare battery is fully charged. It can remain in the charger until
needed. See the following figure.
Advertising