Nesco WK-64 - Manual (Page 5)

3
E
n
gl
is
h
Parts
HINGED LID: For easy filling, cleaning and storage, the lid is hinged and can be opened
with a push of a button. Lid is attached and cannot be removed.
LID RELEASE LEVER: Thumb-action control opens the lid with the gentle press of the
release for easy cleaning and filling.
STEAM CONTROL: Located permanently on the inside of the unit, controls the
operation of the appliance by sensing the precise moment to turn off the power when
water is at boiling temperature. Prevents dry boiling that can cause mineral buildup.
SPOUT: Large opening for easy filling and pouring.
REMOVABLE FILTER: Depending on the hardness of your water, scale particles may
remain suspended in the water. The filter will prevent these particles from entering your
drink. It is important to keep the filter clean, so we made it easy to remove.
WATER LEVEL MARKINGS: Always fill kettle with cold water between the minimum
and maximum levels.
POWER ON LAMP: The lamp will turn on indicating the kettle is heating and will turn
off when heating cycle is complete.
ON/OFF SWITCH: Simply press the lever to begin heating cycle, kettle will
automatically turn off when heating cycle is complete. Switch can be manually turned off
at any time during the heating cycle by flipping switch upwards.
BASE STATION w/ CORD STORAGE: Allows the kettle to be placed on the base in
360° rotation, giving you the flexibility to position the base anywhere on the counter.
Underneath the base station you can wrap the cord for easy storage and adjust the length
to meet your needs.
Before using your Water Kettle the first time!
Read all Important Safeguards and Operating Instructions before using the first time.
Remove all packing materials from the Kettle and Base Station. Keep packing until you
are fully satisfied that product is working correctly.
Fill kettle with cold water to the maximum level and boil, discard water and repeat.
Wipe all surfaces with clean soft towel or sponge.