MIDLAND WR-120 Owner Manual - Manual (Page 9)

WR-120 Owner’s Manual
page 8 www.midlandradio.com
User Notifications:
Alert Type (Display, Voice or Tone):
1. Press MENU to open menu options.
2. Press
▲
to scroll through menu to ALERT TYPE, then press SELECT.
3. Press
▲
to choose VOICE, TONE or DISPLAY then press SELECT.
4. Press MENU to exit menu mode.
Alert Type Description
Display When the DISPLAY alert type is chosen, only a
text alert will scroll on the display. There will be
no audible alarm.
Voice
When the VOICE alert type is chosen, the alert
tone will sound for 8 seconds, then you will
hear the voice of the weather broadcast for 3
minutes.
Tone When the TONE alert type is chosen, the alert
tone will sound for 3 minutes, or until you press
any but ton.
Reviewing Recent Alerts:
The WR-120 All Hazards Weather Alert Radio can store up to 10 different
Weather/Hazard alerts (with overlapping effective times) in its memory. If
the weather radio receives a new alert while any previous alert is still in
effect, it automatically displays the new alert. You can review all alerts still
in effect by pressing
▲
to scroll through the weather radio’s active alert
memory. A double beep indicates the end of the list. “NO MESSAGE” will be
displayed if no alerts are active.
Alert Test:
1. Press MENU to open menu options.
2. Press
▲
to scroll through menu to ALERT TEST.
3. Press SELECT to sound the alert siren.
4. Press any button to silence the siren or press MENU to exit menu mode.
Note: Ensure ON/OFF switch is in the ON position
Set Channel/Volume:
1. Press MENU to open menu options.
2. Press
▲
to scroll through menu to SET CHANNEL then press SELECT.
3. Tune the channel to the desired broadcast by using
▲
or ▼ .
4. Adjust the volume to a comfortable level by using VOLUME UP or
VOLUME DOWN.
5. Press MENU to exit menu mode.
Note: Ensure ON/OFF switch is in the ON position