MITSUBISHI ELECTRIC SE2U - Manual (Page 28)

Operation 24
Using the Menus
The projector is equipped with on-screen display (OSD) menus for making various adjust-
ments and settings.
There are 8 different menu languages. (Refer to page 29 for more details.)
The following example describes the adjustment of the keystone.
1. Press 6 MENU on the projector or
MENU on the remote control to turn the
on-screen menu on.
4. Adjust keystone values by
pressing
3 Left / Right 4 on
the projector or 3 / 4 on the
remote control.
2. Use 3 Left/ Right 4 on the projector
or 3 / 4 on the remote control to
select Picture menu.
3. Use 5EXIT or 6MENU on the pro-
jector or 6 / 5 on the remote control to
select Keystone.
5. Press 5EXIT * on the projec-
tor or press MENU on the
remote control to leave and save
the setting.
*The first press leads you back to the
submenu and the second press closes
the on-screen menu.