Marantz PMD351 User Manual
Page 9
ENGLISH
REVERSE PLAY button
Press the REVERSE PLAY button
to engage
the tape deck into the reverse play function.
STOP button
Press the STOP button
to cancel all current
operations of the tape deck.
FORWARD PLAY button
Press the FORWARD PLAY button to engage
the tape deck into the forward play function.
Indicator light in the button is lit during forward
play, flashing during stop or pause.
FAST FORWARD button
Press the FAST FORWARD button
to
engage the tape transport into the fast forward
wind mode from the left (supply) to the right
(take-up) reels.
mode, this function is used along with the NEXT/
SEARCH FAST FORWARD button
to select
the desired tracks to be played.
Note:
Automatic search operations cannot operate on
the Tape and CD at the same time.
PLAY/PAUSE button
Press the PLAY/PAUSE button
to change
the CD player mode from CD play to CD pause
or from CD pause to CD play.
NEXT/SEARCH FAST FORWARD button
When the CD player is in the play or pause
mode, pressing the NEXT/SEARCH FAST
FORWARD button
will skip forward one
track for every time the control button is pushed.
Keeping this control depressed causes the unit
to advance (scan) into the track. The track time
display will show your current location within the
song. During the program mode, this function is
used along with the PREVIOUS/SEARCH
REVERSE button
to select the desired
tracks to be played.
STOP/EJECT button
Press the STOP/EJECT button
to stop the
CD Player while in the play mode. Press the
STOP/EJECT button
while in the Stop
mode to open the door and eject the disk.
During the program mode, the STOP/EJECT
button
will cancel the current program as
long as the CD player is in the Stop mode.
HP SELECT switch
The HP SELECT switch (Headphone selector
switch) is used to switch the headphone output.
HEADPHONES jack
The HEADPHONES jack is used to allow
monitoring of the Tape, CD or Tape/CD Mix
through headphones. This jack requires that a
1/4" headphone jack connection be made and
the desired source can be selected by the HP
SELECT switch located directly above the
headphone input jack.
COMPACT DISC tray
The COMPACT DISC tray is used to hold the
desired CD for playback.
c
TAPE
PLAY PAUSE
STOP
PLAY
PLAY
b c d e
d
e
PREVIOUS/SEARCH REVERSE button
When the CD player is in the play or pause
mode, press and release the PREVIOUS/
SEARCH REVERSE button
to skip back to
the beginning of the current track and then skip
one track for every time the control button is
pressed and released. Keeping this control
pressed for more than 1/2 a second causes the
unit to retreat (backward scan) within the track.
The track time display will show your current
location within the song. During the program
CD
PLAY /PAUSE
STOP/EJECT
f g h i
f
g
h
i
- 9 -
b
13
14
15
CD PLAYER CONTROL buttons