MITSUBISHI ELECTRIC LVP-XD10U - Manual (Page 26)

22 English
C Troubleshooting
PROBLEMS TRY THESE SOLUTIONS
NO POWER y Plug the power cord into the AC Inlet.
y Plug the power cord into the power Inlet.
y Wait two minutes after the projector has been turned off
before turning the projector back on.
NO PICTURE y Check that you have selected the proper input source.
y
Ensure all cables are connected properly.
y Adjust the brightness and contrast.
y Remove the lens cap.
y Is the POWER indictor flashing?
y Is the STATUS Indicator flashing?
IMAGE ISN’T
SQUARE ON THE
SCREEN y Reposition the unit to improve its angle on the screen.
y Is the vertical offset properly corrected using the keystone
function?
POOR COLOR y Select the correct video system.
y Adjust brightness, contrast, or saturation.
IMAGE IS BLURRED y Adjust the focus.
y Reposition the unit to improve its screen angle.
y Ensure the distance between the unit and screen is within
the adjustment range of the lens.
REMOTE CONTROL
DOESN’T WORK y Replace the batteries with new ones.
y Make sure there is no obstacle between the remote control
and the unit.
y
Stand within 10 meters (32 feet) of the unit.
y Make sure nothing is blocking the receiver on the control
pad.
NO SOUND y Check audio cable connection from audio input source.
y
Adjust audio source.
y Press “Volume” (+) button.
y Press “Mute” button.