MITSUBISHI ELECTRIC LVP-XD10U - Manual (Page 13)

English 9
B Remote Control
Figure 12 Remote control
The remote control allows you to operate the function keys on the projector and to emulate
mouse function when the projector is connected to a computer.
MAIN UNIT FUNCTION
Menu To correct the upper distortion of the projected image when
keystone occurs.
X X X X (Keystone +) To navigate through sub-pages or to increase the scale bar
number.
W W W W (Keystone -) To navigate through sub-pages or to decrease the scale bar
number.
Exit (Auto) To exit from the current page or OSD menu, and save setting
changes.
L ASER
L ED
STANDBY/O N
M ENU
F REEZE
L-C LICK
M AGNIFY
R ETURN
E XIT
R-C LICK
V OLUME
M UTE
B LANK
About laser beam
This remote control is class 2 (max. output 1 mW
laser diode 640 - 660 nm) laser equipment.
Beam Divergence : 3m distance about 5.0mm x
3.0mm (+/- 1.5mm)
CAUTION :
Pressing the LASER button on the provided
remote control emits a laser beam. Do not look into
the beam light directly. Do not point the laser beam
at people. Looking at the laser beam directly may
damage to your eyesight.
The use of controls or adjustments or procedures
other than those specified herein may result in
hazardous radiation exposure.
B ACK SIDE