Metz TG 73 - 100 MT - Manual (Page 45)

45
The picture quality of a video film can be impro-
ved in a terrestrial programme position with a
standard channel.
The video signal for this programme position
must be set to „Aerial“.
To ensure optimum picture quality the „VCR“
function must be switched on.
Set the „VCR“ function to „1“ with the keys
and press the key to store the setting in the
programme position.
Press the key to return to the TV picture.
If setting 1 does not result in a satisfactory picture
quality, you can switch to setting 2.
TV
OK
+ -
1. Select the station table and
call the picture submenu
2. Call the second picture sub-
menu and adjust VCR
Programme Std Pict.
▲▼
<< weitere Einstellungen
Logo, Channel, Signal
6 0 0 + 0 6 C 1 - G B
VTR1
ARD
ZDF
SAT 1
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
0
1
2
3
4
5
6
7
8
9
—
—
—
—
Sound
—
—
—
—
S h a r p n e s s
N o i s e r e d u c t i o n
C T I
f u r t h e r
3
A1
On
? MENU return Help TV picture
TV station table
Programme Std Pict.
▲▼
<< weitere Einstellungen
Logo, Channel, Signal
6 0 0 + 0 6 J - G B
LOGIC
ARD
ZDF
SAT 1
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
0
1
2
3
4
5
6
7
8
9
—
—
—
—
Sound
—
—
—
—
Chrom. adjustm.
Col. offset adj.
Contrast adj.
Picture format
VCR
00
0
00
4:3
1
TV station table
? MENU
return Help TV picture
AV
- +
OK
14. Connecting peripheral equipment
Video recorders
Connecting a video recorder via the aerial socket
• Connect the aerial output (RF-out) of the video recorder to the aerial socket of your TV by means of the aerial cable.
• Load a recorded video cassette in the video recorder.
• Start playback or switch on the test pattern of the video recorder. The test pattern of most video recorders is located within the standard
channels Ch 30 to Ch 40 (see operating instructions of the video recorder).
• Execute a station search, beginning with standard channel 25. See Section 3. Presetting TV stations, station search.
• If the playback picture or the test pattern of the video recorder is displayed on the screen, then this channel can be stored. See Section
3. Presetting TV stations.
• In order to ensure optimum picture quality at all times, select the option „VCR 1“. To do so, proceed as described below.
Press this key on the remote
control....
The screen displays Explanation
red
red
blue
white
red