Mazda 2007 3 4-DOOR - Manual (Page 318)

Black plate (317,1)
3. Install the new bulb in the reverse order
of removal.
NOTE
l To replace the bulb, contact an
Authorized Mazda Dealer.
l If the halogen bulb is accidentally
touched, it should be cleaned with
rubbing alcohol before being used.
l Use the protective cover and carton
for the replacement bulb to dispose
of the old bulb promptly and out of
the reach of children.
Low-beam bulb
(Xenon fusion bulb)
You cannot replace the low beam bulbs by
yourself.
The bulbs must be replaced at an
Authorized Mazda Dealer.
(Halogen bulbs)
1. Detach the electrical connector from
the bulb by pulling it to the rear.
2. Pull off the sealing cover.
3. Unhook the bulb retaining spring.
4. Swing the retaining spring out and
away to free the headlight bulb.
5. Carefully remove the headlight bulb
from the socket by pulling it straight
back.
6. Replace the bulb.
7. Install the new bulb in the reverse order
of removal.
NOTE
l To replace the bulb, contact an
Authorized Mazda Dealer.
l If the halogen bulb is accidentally
touched, it should be cleaned with
rubbing alcohol before being used.
l Use the protective cover and carton
for the replacement bulb to dispose
of the old bulb promptly and out of
the reach of children.
l When reinstalling the sealing cover,
make sure
faces up.
Maintenance and Care
Owner Maintenance
8-43
Mazda3_8V66-EA-06F_Edition2 Page317
Friday, May 26 2006 10:55 AM
Form No.8V66-EA-06F