Save these instructions, Installation guide, Grounding instructions – Magic Chef MCC1010STG User Manual

Page 5

Advertising
background image

4

INSTALLATION GUIDE

INSTALLATION GUIDE

INSTALLATION GUIDE

INSTALLATION GUIDE

1. Make sure that all the packing

materials are removed from the inside of

the door.

2. Check the oven for any damage, such

as misaligned or bent door, damaged

door seals and sealing surface, broken or

loose door hinges and latches and dents

inside the cavity or on the door. If there is

any damage, do not operate the oven but

contact qualified service personnel.

3. This microwave oven must be placed

on a flat, stable surface to hold its weight

and the heaviest food likely to be cooked

in the oven.

4. Do not place the oven where heat,

moisture, or high humidity are generated,

or near combustible materials.

5. For correct operation, the oven must

have sufficient airflow. Allow 8 inches of

space above the oven, 4 inches at back

and 2 inches at both sides. Do not cover

or block any openings on the appliance.

Do not remove feet on which oven

stands.

6. Do not operate the oven without glass

tray, roller support, and shaft in their

proper positions.

7. Make sure that the power supply cord

is undamaged and does not run under the

oven or over any hot or sharp surface.

8. The socket must be readily accessible

so that it can be easily unplugged in an

emergency.

GROUNDING INSTRUCTIONS

GROUNDING INSTRUCTIONS

GROUNDING INSTRUCTIONS

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of an electrical short circuit, grounding

reduces risk of electric shock by providing an escape wire for the electric current.

WARNING: Improper use of the grounding plug can result in a risk of electric shock.

Electrical Requirements

The electrical requirements are a 120 volt 60 Hz, AC only, 20 amp. It is recommended that

a separate circuit serving only the oven be provided. The oven is equipped with a 3-prong

grounding plug. It must be plugged into a wall receptacle that is properly installed and

grounded. This unit is not designed for recreational vehicles.

Power Supply Cord

1. A short power supply cord is provided to reduce the risks resulting from becoming

entangled in or tripping over a longer cord.

SAVE THESE INSTRUCTIONS

Advertising