Miele KWT1611VI - Manual (Page 55)

^ Adjust the custom door to adjacent
furniture/fixtures.
^ Align the custom door with the
double-threaded bolts.
^ Tighten the nuts on the adjusting rail.
This will correct the side alignment of
the door.
^ Put the side strips o back into place
and screw them completely down on
both sides of the appliance door.
^ Align the custom door again as
needed and tighten all screws on the
sides.
Attaching the covers
^ To mount the cover strips on both
sides of the door, click them into
place from bottom to top, into the
gap between the appliance door and
the custom door.
^ Screw the brackets onto both sides
of the appliance, to hold the cover
strip.
Installation
55