Miele KWT1611VI - Manual (Page 46)

^ Choose the desired switching
contact and connect according to
alarm system requirements.
Output of the Home Security System on
the electronic board:
NC: normally closed
Com: common
NO: normally open
Switching capacity: 120 V/250mA
30 V/1A
^ Continue with the appliance
installation.
Preparing the installation
niche
Keep the appliance doors closed
until it is securely fastened in the
niche. Tipping hazard.
If the installation niche is deeper than
the appliance, a solid wooden beam
a
can be placed behind the anti-tip
brackets
b so the appliance can be
securely attached to the base or wall.
The length of the wooden beam a
should be to the width of the installation
space.
If possible, always screw the
wooden beam into existing studs on
the rear panel of the niche.
Installation
46