Mellerware PROGLIDE STEAM IRON 23600 User Manual

Page 3

Advertising
background image

IMPORTANT SAFEGUARDS

When using your iron, basic safety precautions
should always be followed:

Make sure the voltage used corresponds with

•

the one indicated on the rating label.
Use the iron only for needed use as described

•

in the instruction manual.

Close supervision is necessary when any appli-
ance is used near children. Do not leave iron un-
attended while connected or on an ironing board.
Burns can occur from touching hot metal parts, hot
water or steam.

Keep the iron out of reach of children.

•

The iron should never be left unattended while

•

it is connected to the mains supply.
Unplug the iron from the mains electrical sup-

•

ply before:

1) Cleaning
2)Filling with water or emptying the water tank
3) Immediately after use

Never operate the iron with a damaged power

•

cord or plug, or after it has fallen or been dam-
aged in any way. To avoid the risk of electric
shock, do not disassemble the iron. Take it to
a qualified serviceman for examination and
repair.
Do not let the cord touch hot surfaces.

•

To protect against a risk of electric hazards,

•

do not immerse the iron in water or any other
liquid.
The iron must be used and rested on a stable

•

surface.
The iron is not to be used if it has been

•

dropped, if there are visible signs of damage
or if it is leaking.

BEFORE FIRST USE

It is normal for a small amount of smoke to be

•

produced the first time, this will quickly disap-
pear.

When using the steam function for the first

•

time, do not direct the steam towards the laun-
dry, as there could be debris from the steam

vents.

FILLING WITH WATER

Make sure that both the Steam Control turn-

•

ing Knob and Temperature Control Dial are in
“OFF” position.
Hold the iron upright so that the water-filling

•

inlet is in a horizontal position.
Fill with water through Water Filling Inlet until

•

the water reach the “MAX” mark indicated on
the side of the iron, and never fill above this
mark.

SETTING TEMPERATURE

Follow the ironing instructions on the garment la-
bel. If there is no instruction but you do know the
kind of fabric, please consult the following table.
Note: If the fabric consists of various kinds of fab-
rics, always select the temperature required by the
most delicate fabrics.

FABRIC

TEMP. CONTROL

TEMP. REQUIREMENT

Synthetic

•

Low temperature

Silk, wool

••

Medium temperature

Cotton, linen

•••

High temperature

MW_WX23600_PROGLIDE_IRON_IM.indd 3

MW_WX23600_PROGLIDE_IRON_IM.indd 3

7/21/2009 4:41:32 PM

7/21/2009 4:41:32 PM

Advertising