Foglamp control, High beams, Lights – Mercury Mariner Hybrid 2007 User Manual

Page 42

Advertising
background image

To program the auto lamp exit time delay:

1. Start with the ignition in the OFF position and the headlamp control
in the autolamp position.

2. Deselect the auto lamps.

3. Put the ignition in RUN.

4. Put the ignition in OFF.

5. Select the autolamps.
Note: Steps 2 through 5 must be performed within a 10 second

period.

• At this point, the headlamps and park lamps will turn on.
6. Deselect the auto lamps after the desired auto lamp delay time
(maximum of 3 minutes).
• At this point, the headlamps and park lamps will turn off.

Foglamp control

The foglamps can be turned on
when the headlamp control is pulled
toward you and is in any of the
following positions:
• Parking lamps
• Low beams
• Autolamps (when active)
Foglamps will turn off when the
highbeams are activated.

High beams

Push the lever toward the
instrument panel to activate. Pull
the lever towards you to deactivate.

2007 Monterey (mty)
Owners Guide (post-2002-fmt)
USA
(fus)

Lights

42

Advertising