Dryer care, Cleaning the lint filter, Cleaning the exterior and the control panel – Miele NOVOTRONIC T 1576 User Manual
Page 16: Cleaning the drum and stain- less steel parts
Cleaning the lint filter
The lint filter must be cleaned before
or after every program.
^ Open the door and remove the lint fil-
ter.
^ Wipe the lint off the filter with your
hand (do not use any sharp objects!)
^ Any lint remaining in the hollow part
of the door can be removed through
the gap at the bottom with a dust
brush or vacuum.
^ Return the lint filter and close the
door.
The lint filter can be rinsed with hot
water if necessary.
^ Dry the lint filter before putting it back
in place.
Before cleaning the tumble dryer,
disconnect the machine from the
power supply.
Never use abrasive cleaners, scour-
ing pads or steel wool or caustic
(oven) cleaners on the dryer. They
will damage the surface.
Cleaning the exterior and the
control panel
^ The exterior and the control panel
can be cleaned with warm water and
liquid dish soap applied with a soft
sponge.
^ Wipe dry using a soft cloth.
Cleaning the drum and stain-
less steel parts
^ Stainless steel surfaces can be
cleaned using a non-abrasive stain-
less steel cleaner.
^ Wipe dry using a soft cloth.
Dryer care
16