Operating instructions, Uvs33/36 vent-free heaters, Top louvre (grille) removal – Majestic Appliances UVS33RN User Manual

Page 11: Window frame removal, Log installation uvs33

Advertising
background image

11

UVS33/36 Vent-Free Heaters

20002211

Operating Instructions

LG117

UVS33 logs

12/20/99 djt

Fig. 17 UVS33 log placement.

Top Left Log

(A20)

Rear Log

(A19)

Top Right Log

(A21)

Front Left Log

(A17)

Front Right Log

(A18)

LG117

Burner

Lava Rock

Lava Rock

Top Louvre (Grille) Removal

To remove the top
louvre (grille) as-
sembly, lift louvre
up and then out.
(Fig. 15)

Window Frame Removal

1. Shut off gas. (Refer to Lighting Instructions)
2. Let the unit cool if it has been operating.
3. Remove top louvre. (Refer to Top Louvre Removal)
4. Open the bottom louvre assembly.
5. Release the two clamps at the bottom of the window

frame by pulling down on the clamp handles.

Fig. 15 Louvre installation and

removal.

FP444

1.

2.

FP444

remove louvre

12/99

Top Louvre

(Grille) As-

sembly

Window Frame

Fig. 16 Window Frame installation and removal.

DV34-2

Glass removal

12/99

Clamps

Fireplace

Front

DV34-2

FP1000

install glass

12/99

Window

Frame

Pull

Clamp

Hook

Push

Clamp

Handle

FP1000

Window

Frame

6. Lift off the window frame as shown in Figure 15.
7. To reinstall window frame follow the above procedure

in reverse. (Fig. 16)

Log Installation UVS33

1. Remove window frame. (See "Window

Frame" section)

2. Remove logs from packaging.

As with all plastic - these
are not toys and should be
kept away from children and
infants.

3. Place rear log on rear bracket (en-

sure log is seated properly, leveled
and centered to the unit), so it will not
move from side to side and it is firmly
positioned on the bracket.

4. Place front left log on top of burner, left

side. Use log's bottom holes to locate
it onto the left bracket log locator
studs.

5. Place front right log on top of burner,

right side. Use log's bottom holes to
locate it onto the left bracket log loca-
tor studs.

6. Place top left log onto locator notches.

Ensure log is secure.

7. Place top right log onto locator notches. Ensure log

is secure.

Advertising
This manual is related to the following products: