Marshall electronic V-RD151-4 - Manual (Page 4)

4
A B
C
C. Primary Menu Controls
Power On/Off selection switch illuminates when monitor is switched on.
Primary menu functions are accessed by pressing the MENU button.
Volume adjustment
does not function
Switch Settings and Indicators 7
Drawer close interlock micro-switch places
monitor into standby mode when in stored position
A. Digital Process Controls
(DPC)-not available in PC or S-Video Modes
Quad - 4 channels displayed simultaneously on the screen.
PIP - Picture in Picture menu selected display of 2 to 4 channels.
Zoom - expands a selected portion of the display
Freeze - of full screen image
SEQN - menu selected channel display for 2 to 4 channels of full screen
image. Sequence switching can be set for 1 to 30 second intervals.
MENU - enables alternate menu
ALT - shift control for selection of highlighted functions
B. Composite Video Controls
Selection for full frame viewing of composite video channels 1 to 4.
Also used for Cursor controls of alternate menu functions.
Illuminates when channel is selected.
* NOTE: Digital Process Control is not available in PC ANALOG or S-VIDEO modes
Displayed source selection
SELECT
Menu Control
PC Analog - Selects input from the HD15 VGA IN connector.
Image is full screen. No DPC functions
Composite - Selects input of composite video 1 to 4 plus DPC functions
S-VHS - Selects input from the
S-VIDEO IN connector. Image is
full screen. No DPC functions
Television - does not function on this model
Primary Menu Functions 8
V-RD151-4 USERS GUIDE