MITSUBISHI ELECTRIC HD1000 - Manual (Page 38)

EN-38
TV60, 480i (525i) - 15.73 59.94 1280 x 720 -
TV50, 576i (625i) - 15.63 50.00 1280 x 720 -
1080i 60 (1125i 60) - 33.75 60.00 1280 x 720 - *2
1080i 50 (1125i 50) - 28.13 50.00 1280 x 720 - *2
480p (525p) - 31.47 59.94 1280 x 720 - *2
576p (625p) - 31.25 50.00 1280 x 720 - *2
720p 60 (750p 60) - 45.00 60.00 1280 x 720 - *2
720p 50 (750p 50) - 37.50 50.00 1280 x 720 - *2
PC98 640 x 400 24.82 56.42 1152 x 720 640 x 400
CGA70 640 x 400 31.47 70.09 1152 x 720 640 x 400
VGA60 640 x 480 31.47 59.94 960 x 720 640 x 480 *2
VGA72 640 x 480 37.86 72.81 960 x 720 640 x 480
VGA75 640 x 480 37.50 75.00 960 x 720 640 x 480
VGA85 640 x 480 43.27 85.01 960 x 720 640 x 480
SVGA56 800 x 600 35.16 56.25 960 x 720 800 x 600
SVGA60 800 x 600 37.88 60.32 960 x 720 800 x 600
SVGA72 800 x 600 48.08 72.19 960 x 720 800 x 600
SVGA75 800 x 600 46.88 75.00 960 x 720 800 x 600
SVGA85 800 x 600 53.67 85.06 960 x 720 800 x 600
XGA60 1024 x 768 48.36 60.00 960 x 720 -
XGA70 1024 x 768 56.48 70.07 960 x 720 -
XGA75 1024 x 768 60.02 75.03 960 x 720 -
XGA85 1024 x 768 68.68 85.00 960 x 720 -
MAC13 640 x 480 35.00 66.67 960 x 720 640 x 480
MAC16 832 x 624 49.72 74.55 960 x 720 832 x 624
MAC19 1024 x 768 60.24 75.02 960 x 720 -
HP75 1024 x 768 62.94 74.92 960 x 720 -
SXGA60 1280 x 1024 60.02 63.98 900 x 720 -
Specifi cation of RGB signals in each computer mode of the projector
Signal mode Resolution Horizontal Vertical Normal mode Real mode
(H x V) frequency (kHz) frequency (Hz) (H x V)*1 (H x V)
*1: When ASPECT in the FEATURE menu is set to AUTO
and SCREEN SIZE in the IMAGE menu is set to16:9.
*2: Available for the signal for the HDMI IN terminal.
Important:
• Some computers aren’t compatible with the projector.
• The projector’s maximum resolution is 1280 x 720
pixels. It may not display images of higher resolutions
than 1280 x 720 correctly.
• If the resolution and frequency of your computer aren’t
shown on the table, fi nd the compatible resolution and
frequency by changing the resolution of your computer.
• In the case of XGA, the right side of the image may
not appear. In this case, adjust TRACKING in the
SIGNAL menu.
• TV60 and TV50 are equivalent to 480i and 576i
respectively. When these signals are supplied to the
VIDEO IN or S-VIDEO IN terminal, the signal mode is
indicated as TV60 or TV50. When they are supplied
to the COMPONENT VIDEO IN or COMPUTER IN/
COMPONENT VIDEO IN terminals, the signal mode is
indicated as 480i or 576i.
• This projector doesn’t support video devices having 4
lines (R, G, B, CS*), and 480i, 576i and 480p signals from
video devices having 5 lines (R, G, B, H, V).
* : Composite Sync
1 R(RED)/C R
2 G(GREEN)/Y
3 B(BLUE)/C B
4 GND
5 GND
6 GND
7 GND
8 GND
9 DDC 5V
10 GND
11 GND
12 DDC Data
13 HD/CS
14 VD
15 DDC Clock
1 TXD IN
2 - -
3 - -
4 GND -
5 - -
6 - -
7 RXD OUT
8 - -
1
3 5
2
6 8
1 5
11
6 10
15
SERIAL (8-pin)
Pin No. Name I/O
COMPUTER IN/COMPONENT VIDEO IN
(Mini D-SUB 15-pin)
Pin No. Spec.
19 1
2 18
Connectors
Replacement part
(Option/not included in the box)
Spare lamp VLT-HC910LP
HDMI IN
(HDMI 19-pin)
1 TMDS Data2+ 11 TMDS Clock Shield
2 TMDS Data2 Shield 12 TMDS Clock-
3 TMDS Data2- 13 -
4 TMDS Data1+ 14 -
5 TMDS Data1 Shield 15 SCL
6 TMDS Data1- 16 SDA
7 TMDS Data0+ 17 DDC Ground
8 TMDS Data02 Shield 18 +5 V Power
9 TMDS Data0- 19 Hot Plug Detect
10 TMDS Clock+
PIN No. SPEC PIN No. SPEC
Specifi cations (continued)