Setting the date and time – Motorola MD490 User Manual
Page 28
26
Settin
g
Up
Yo
ur
Ph
on
e and
Expa
nsio
n Han
d
s
e
ts
Setting the Date and Time
Note: If you subscribe to a caller ID service, the date
and time is automatically set after the 2nd ring on an
incoming call.
Action
1
Press
MENU
(
a
).
2
Scroll to
Date/Time
and press
SELECT
(
a
).
3
Enter the time (2 digits are required for the
hour and 2 digits for the minutes, so use a
leading 0 for 1-digit values).
4
Press
AM/PM
(
a
) to switch between am
and pm.
Note: This applies only if using a 12-hour
clock.
5
Scroll down (
c
) to move the next field.
6
Press
CHANGE
(
a
) to change the time
format (12- or 24-hour clock). Scroll down
(
c
) to move to the next field.
7
Press
CHANGE
(
a
) to select date format
(MM/DD or DD/MM).
8
Scroll down (
c
) to move the next field.
9
Enter the current date.
10 Press
DONE
(
a
).
11 Press
EXIT
(
a
) to return to the standby
screen, or
c
to scroll to a different menu
option.
4110W32o.book Page 26 Wednesday, July 16, 2003 2:02 PM