Memorex MVBD2520-R - Manual (Page 40)

39
CD OPERATION
3
Set the Power Switch 1 on the back of the unit to the ON
position. Then press the Power/Standby button 2 to turn
on the unit. The Power/Standby button will light blue. Press the Open/Close button 1 to open the disc tray and
insert a disc with the label side facing up on the disc tray 2.
1
Press the Pause p button 1 to pause playback. Press the
Pause p button 1 again or the Play ® button 2 to resume
playback.
2
1
4
PLAYBACK OF A CD
2
1
2
To stop playback, press the Stop ( X) button 1. Because
the unit will remember where you stopped, simply press the
Play ® button 2 to resume playback where you left off
(resuming playback).
If the Stop (X) button 1 is pressed again, the unit will enter
the Stop mode.
5
1
1
Press the Open/Close button to close the disc tray. After
loading, Track 1 will automatically start playing.
If the Disc Auto Playback setting (see page 19) is enabled,
the disc will automatically start playback.
NOTES:
• This unit has a resume function that will allow you to
resume playback from the point you last stopped.
Resuming playback may not work on all discs.
• While in MEDIA CENTER, select AUDIO CD. Then press
the ENTER button to select it and start playback.
2
2