Motorola MD4260 - Manual (Page 31)

18
MD4260 User Guide
18
Changing the Dialing Method
1. Press MENU/SEL.
2. Scroll to and select
Handset Setup
.
3. Scroll to and select
Set Tone/Pulse
.
4. Press 1 for
Tone
or 2 for
Pulse
.
5. Press MENU/SEL to save the setting.
6. Press CANCEL to return to the standby screen.
NOTE: When the phone is set for pulse dialing, you may switch to temporary tone dialing
during a call by pressing *. Once pressed, tone will be used for rest of the call. After you
hang up, the phone will return to pulse dialing for the next call.
Registering a New Handset
You can register up to four handsets to your base unit. The handset included with the base
unit is pre-registered. Use the steps below to register new or replacement handsets.
1.
Press MENU/SEL.
2. Scroll to and select
Handset Setup
.
3. Scroll to and select
Registration
.
Hold Base Page Key Until Beep
appears on the display.
4. A confirmation message appears when the registration is successful.