Miele DA 5391 W - Manual (Page 31)

a 3 protective shields to prevent
scratches to the chimney during
installation.
b 1 vent collar
for use with 6" (150 mm) exhaust
ducting
c 1 reducing collar for use with 5"
(125 mm) exhaust ducting.
d Telescopic retaining plate secures
the chimney extension
e Installation kit for recirculation
mode contains diverter, hose and hose
clips (optional accessory)
,
CAUTION
To avoid risk of hand or other injury,
avoid contact with sharp edges
during the assembly and installation
process.
8 large headed screws 5 x 40 mm
for securing the retaining plates and the
canopy.
(S8 wall anchors included in the
packaging are not for use in USA / CDN.)
2 M 6 locking nuts for securing the
motor assembly.
2 screws 3.9 x 7.5 mm for securing the
chimney.
1 lever for dismantling the chimney
Installation diagram
Installation
31