Miele KF 7540 SN - Manual (Page 15)

When pressing the buttons the
following are shown in the display:
– When first pressed the last
temperature selected flashes.
– Each subsequent press of the button
adjusts the temperature shown in
1 °C steps.
– Keeping the button pressed in
adjusts the temperature continually.
Approx. 5 seconds after letting go of
the button the current actual
temperature of the refrigerator or
freezer section is automatically shown.
If you have adjusted the temperature,
wait for approx. 6 hours if the
appliance is not very full and for
approx. 24 hours if the appliance is
full before checking the temperature
display as it will take this long for the
display to show the accurate
temperature in the appliance. If the
temperature displayed is too low or too
high, then adjust the temperature once
more.
Temperature range
The temperature can be adjusted:
– in the refrigerator section from
4 °C to
9 °C
– in the freezer section from
- 14 °C to
- 28 °C
The ambient temperature of the room
and installation location can affect the
time it takes to reach the lowest
temperature. If the ambient temperature
is too high, then the appliance may not
be able to reach the lowest
temperature.
Setting the temperature in the
Stayfresh (0 °C) zone
The temperature in the Stayfresh (0 °C)
zone is automatically held at approx.
0 °C. It can be raised or lowered, e.g. if
you want to use it for storing items like
fish.
^ Press the alarm button for approx. 7
seconds until a " b " shows in the
temperature display for the
refrigerator section and a "
0" shows in
the temperature display for the
freezer section.
To adjust the temperature use the
buttons to the right of the freezer
section temperature display.
Press the
Upper button: to raise the temperature
(it gets warmer)
Lower button: to reduce the
temperature (it gets colder)
The correct temperature
15