McIntosh MC206 - Manual (Page 15)

15
Packing Instructions
Packing Instructions
In the event it is necessary to repack the equipment for
shipment, the equipment must be packed exactly as shown
below. It is very important that the three plastic feet are at-
tached to the bottom of the equipment. Three #10 x 2-1/2
inch screws and washers must be used to fasten the unit
securely to the bottom pad and wood skid. This will ensure
the proper equipment location on the bottom pad. Failure to
do this will result in shipping damage.
Use the original shipping carton and interior parts only
if they are all in good serviceable condition. If a shipping
carton or any of the interior part(s) are needed, please call
or write Customer Service Department of McIntosh Labo-
ratory. Please see the Part List for the correct part numbers.
Quantity Part Number Description
1 033888 Shipping carton only
4 033887 End cap (Foam pad)
1 033697 Inside carton only
1 033725 Top Pad
1 034008Bottom pad
3 017218Plastic foot (spacer)
1 033699 Shipping skid
3 101169 #10 x 2-1/2 inch Wood screw
3 104033 #10 x 1-3/4 inch Flat washer
4 017218Plastic foot
4 100159 #10-32 x 3/4 inch Machine
screw
4 104083 #10 x 7/16 inch Flat washer