Memorex MT1091 - Manual (Page 12)

– 11 –
PROGRAMMING CHANNELS
With automatic programming, the TV automatically places every channel you receive in its
memory, allowing you to scan through those channels when you press the CHANNEL
(Up/Down) buttons. With manual programming, you tell the TV what channels you want to
scan through when you press the CHANNEL (Up/Down) buttons.
Automatic Programming
a Press the MENU button to bring up the
menu screen.
MENU TUE 1:35PM
CLOCK SET
PROGRAM TIMER
PICTURE ADJUST
CH PROGRAM
LANGUAGE
DEMONSTRATION
EXIT
[+] / [–] : MENU SELECT
[MENU] : ENTER
s Use the + or – button to highlight CH
PROGRAM, then press the MENU but-
ton to select it.
CH PROGRAM
AIR/CABLE CABLE
AUTO SEARCH
CH MEMORY
EXIT
[+] / [–] : SELECT
[MENU] : AIR/CABLE
d If you have a cable connected to the TV,
press the MENU button until CABLE
appears to the right of AIR/CABLE. If
you have an antenna connected to the
TV, press the MENU button until AIR
appears to the right of AIR/CABLE.
CH PROGRAM
AIR/CABLE CABLE
AUTO SEARCH
CH MEMORY
EXIT
[+] / [–] : SELECT
[MENU] : AIR/CABLE
f Use the + or – button to highlight AUTO
SEARCH.
CH PROGRAM
AIR/CABLE CABLE
AUTO SEARCH
CH MEMORY
EXIT
[+] / [–] : SELECT
[MENU] : START
g Press the MENU button to select AUTO
SEARCH. The TV will flip through all of
its 125 channels, placing the ones you
receive in its memory. When it is fin-
ished, the channel program screen will
appear on-screen again.
h Use the + or – button to highlight EXIT.
CH PROGRAM
AIR/CABLE CABLE
AUTO SEARCH
CH MEMORY
EXIT
[+] / [–] : SELECT
[MENU] : EXIT
j Press the MENU button to exit.
NOTES
To stop automatic programing while it is
in progress, press the MENU button.