Memorex MP3112 - Manual (Page 10)

9
NOTES
•
Programming is the ability to preselect the order in which a series of tracks will be played.
• Each track may be stored in the program memory as many times as desired (up to 19 tracks).
• As each track is played, its track number will be displayed. You can move forward or backward through
the programmed tracks with the Skip/Search
or button.
• The CD player will stop after all programmed tracks have been played or the STOP (■) button is
pressed.
• When 19 tracks have been programmed, the CD memory is full (“- -” will appear in the display).
• To cancel program playback, press the STOP (■) button while in the stop mode, or open the CD Door.
• To check the program, press the PROGRAM button once more; the display will show the track numbers
in the order they were programmed.
TO PROGRAM THE MEMORY (UP TO 19 TRACKS)
Slide the Function switch to the
CD position; the POWER ON
indicator will light. Insert a CD as
described in the TO INSERT A
CD section on page 6.
1
Use the Skip/Search ( ) ❶ or
( ) ❷ button to select the first
track to be programmed.
2
1
3
Press the PROGRAM button, the
PROGRAM indicator will blink.
2
Press the PROGRAM button
again; the selected track has now
been programmed and counted as
program 1.
4
Press the PLAY/ PAUSE ( )
button to begin playback; the
Program indicator will blink and
the tracks will play in the order
programmed.
6
Repeat steps 3 and 4 to program
the other desired tracks in
sequence (up to 19 tracks).
2
1
5
COMPACT DISC (CD) OPERATION (CONTINUED)
MP3112.OM.QXD 6/25/02 11:53 AM Page 9