Monarch Instrument HANDIPRINT 6017 - Manual (Page 6)

1-2 Getting Started
B a t t e r y a n d S a f e t y I n f o r m a t i o n
The printer is powered by a 7.4V Lithium Ion (LiIon)
battery. There are no memory effects with LiIon batteries
and reconditioning is not required. Lithium ion batteries
do not have to be completely drained before charging.
♦ Charging time is approximately 1.5 to 3 hours.
♦ Take the battery out of the printer when storing the
printer for long periods of time.
♦ The battery storage temperature is 40
°
F to 104
°
F
(4
°
C to 40
°
C). Do not store a fully charged battery
at temperatures greater than 104
°
F (40
°
C) for long
periods of time. The battery may permanently lose
charge capacity.
♦ Be sure to use a fully charged battery before long
or battery-intensive printing sessions. Certain
operations (for example, printing receipts with a lot
of bar codes and graphics) drain the battery more
quickly than others.
♦ Disposal information – Do not throw in trash.
Dispose according to your local regulations.
CAUTION
Do not disassemble, short circuit, heat
above 80
°
C, or incinerate. The
battery may explode.
♦ The recommended temperature for charging is
68
° F (20 ° C) to 77 ° F (25 ° C).
I n s t a l l i n g t h e B a t t e r y
One battery is included with the printer.
Similar to a cordless phone battery,
the printer’s battery must be charged
before using it.
1. Remove the handheld. (This step is optional.)
2. Turn over the printer.