Magellan GPS receivers - Manual (Page 57)

47 Magellan SporTrak GPS Receiver
Reference
Replacing a Leg — Replaces the destination of an existing leg with a
new destination.
Select route to be edited.
See Instructions for
Viewing a Route
Highlight
Replace
Select
Database
Highlight destination
waypoint for leg that will
be replaced.
Select
Waypoint
Appending a Leg — Adds a leg to the end of a route.
Select route to be edited.
See Instructions for
Viewing a Route
Select
Database
Highlight next available
leg. (Indicated by
dashes)
Select
Waypoint
Appending a Newly Created Waypoint to a Route — Allows a newly
created waypoint to be appended to any route in memory.
Create a Waypoint by pressing the GOTO button.
Can be present position, user-generated position
or by using Map Cursor to locate position.
Select
Route Edit/Modify
Waypoint as
desired.
Highlight
“Route”
Button
Reversing a Route — Allows any route in memory to be reversed. In the
example used earlier of “A” to “B” to “C” to “D”, if this route were
reversed it would end up as “D” to “C” to “B” to “A”.
From
Any
Screen
Highlight
Routes
Select
Route
Highlight
Reverse