MITSUBISHI ELECTRIC WD-65000 - Manual (Page 43)

43
Part III : Setup
Clock Menu: Clock Setting (Manual)
Clock Setting (Manual)
(Figure 1)
For the manual clock setting, select the
current time, including AM or PM.
Press
{
or
}
to slowly adjust the time.
Press and hold
{
or
}
to quickly adjust the
time.
Figure 1. Clock Menu (Manual) Set Day
(Figure 1)
When Manual has been selected for the
Clock Setting, you need to select the current
day of the week.
Clock Setting
Clock Setting (Auto)
Clock Setting (Auto)
(Figure 2)
Setting the Clock Setting to Auto will auto-
matically set the day and time using Ex-
tended Data Service (XDS) time data. This
data is automatically retrieved from a PBS
channel or other channel carrying this serv-
ice.
Time Zone
(Figure 2)
When Auto has been selected for the Clock
Setting, you need to select the correct time
zone (Atlantic, Eastern, Central, Mountain,
Pacific, Alaska, or Hawaii) for your area.
Daylight savings
(Figure 2)
When Auto has been selected for the Clock
Setting, you need to select the Daylight Savings
Time (DST) option that your state uses (Applies
=uses DST, or Ignore =does not use DST).
The clock time and day will be set automati-
cally after tuning to a channel carrying the
Extended Data Service (XDS) time data
(usually your local PBS channel.)
Figure 2. Clock Menu (Auto)