MITSUBISHI ELECTRIC NETCOMMAND 2.0 HD-5000A - Manual (Page 17)

17
Cancel Current Recordings
To cancel a recording in progress, display the Device
Selection menu and highlight the source of the recording.
Confirm that the icon for VCR (or recording device) is
in the Connection Section next to the TV icon. Press the
CANCEL button. The icon for the VCR (or recording
device) will disappear from the Connection Section to
confirm the cancellation.
Copy-Protected Material
When attempting to record copy-protected and
C protected material, the Record functions of the
NetCommand and IEEE  systems may be prevented
or stopped.
If one of the sub-channels in a bitstream is copy-protected,
then the entire bitstream, that is, all programs for that
bitstream or channel, are similarly copy-protected. If
you have a recording that is tagged “Record Once”,
NetCommand will not allow another copy to be made.
Restrictions for Traditional VCRs
If turned On, the HDTV Receiver must be viewing the
source device.
• Your VCR must be connected to the A/V Receiver VCR
record outputs, or HDTV Receiver monitor outputs if
you do not have an A/V Receiver.
• The VCR must be set manually to “line input”. Display
the Device Selection menu, highlight the VCR and
press GUIDE to change VCR inputs.
• If you are connected to an A/V Receiver, the A/V
Receiver must be turned on.
• To record directly from antenna or cable, connect the
HDTV “Loop Out” to the VCR “Antenna In.”
• The HDTV Receiver can select channels on compatible
cable boxes for recordings. Leave the cable box turned
on.
• If the AV Receiver, source device or recording device
cannot power On automatically, then leave those devices
powered On.
NetCommand® Controlled Recordings, continued
Figure 16. Record List Screen
Note: When selecting channels, you may use the
ADJUST or , or use the number buttons.
Record List Screen
(Figure 16)
To view a list of all of your currently programmed
recordings, select List from the Record/Connect screen.
A maximum of  scheduled recordings are possible at
a time. To cancel a recording on the Record List, use
ADJUST or to select the recording, then press
CANCEL.
When recording digital channels from
Ant-DTV or Cable DTV that have
multiple sub or minor channels, all
subchannels are recorded simultaneously.
Some digital cable channels will contain
too many sub channels for proper
recording on DVHS. In these situations,
there will not be picture or sound from
any sub channel during playback.
IMPORTANT