Mellerware 23101 User Manual
Page 3
Description
1 Filling apeture for water tank
2 Revolving handle
3 Spray / Vapour jet knob
4 Revolving handle lock
5 Temperature regulator
6 Control lamp
7 Voltage changeover switch
8 Spray nozzle
CHARACTERISTIC
Temperature Dial Knob
Power Indicator Light
Soleplate
Water Filling Aperture
Transparent Water Tank
Dry/Steam Iron Selector
Spray Button
Voltage changeover
switch
FUNCTION
Adjust temperature according to fabric to be ironed.(see table below)
Indicator light will go off when desired temperature is reached. The light will go on
and off as the temperature is regulated by the adjustable thermostat.
Super smooth non stick ironing surface. If ironing surface is sticky ensure
temperature setting is correct as per table below and item being ironed is clean.
Using the measuring cup only, fill the tank with clean water here. Use demineralized
water in hard water areas or water with lime scale.
Do not overfill. Water level in tank is easily visible during ironing.
Choose desired level of steam or dry ironing by sliding the knob
Depress for spraying water onto fabric for dry ironing or when required.
Use this switch to change between 115V or 230V
KEY and CHARACTERISTICS
1
2
3
4
5
6
7
8
Dry/Steam selector knob
Voltage changeover switch
MW_CO23101 Voyager_IM.indd 3
MW_CO23101 Voyager_IM.indd 3
3/6/2009 9:30:19 AM
3/6/2009 9:30:19 AM